1. This type of Ingress/Egress monitor depicts the amount of incoming and outgoing traffic: Ingress/Egress Bandwidth
2. Where are AppFlow reports generated in the SonicOS management inter- face: Investigate>Reports>Appf
...
1. This type of Ingress/Egress monitor depicts the amount of incoming and outgoing traffic: Ingress/Egress Bandwidth
2. Where are AppFlow reports generated in the SonicOS management inter- face: Investigate>Reports>Appflow Reports
3. Which tab of Packet monitor contains the options that enables packets to be overwritten with new ones when the buffer is full: Settings
4. Which packet reply method is used to send individual packets with respec- tive header fields and payload details to the firewall engine for analysis: Sin- gle Packet
5. This diagnostic tool within SonicOS tests for MySonicWall server connec- tivity: Check network Settings
6. Threat protection on a SonicWall device consist of what: Intrusion Preven- tion
Gateway Antivirus Anti-Spyware
App Control
7. The following are variables used to configure static routes to forward traffic: Service
Interface Zone
Size with no e
8. What is the default public server type in the public server guide wizard: -
Web Server
9. When is route-based VPN used: -Used when a more scalable solution is needed in a large
enterprise for site to site vpn connections
-Can also be used to connect another brand of firewall
-Add redundancy w/floating static
10. What are the two options when preempting an administrator logged into the firewall: 1. Drop into Non-Config Mode
2. Log out
11. A snapshop of packet monitor output can be exported as one of five things: PcapNG
Libpcap HTML
Text Appdata
12. What are the 7 default predefined zones in the Sonicwall: Lan Wan
DMZ VPN SSL VPN
WLan Multicast
Look What Darth Vader Saw While Marauding
13. What is the default firewall name: Mac address of the X0 interface. This is also the serial number of the device.
14. What are the fail over/load balancing types: Basic Failover Round Robin
Spill-Over Ratio
15. What is the default probe name: responder.global.sonicwall.com
16. App control is by default: off
17. How many zones are created by default: 7 zones
18. What are the two default rules in the sonicwall: 1. Lan>WAN Allow
2. Wan>Lan deny
19. What is DPI-SSL: deep data inspection of packets to a device on the son- icwall's network. Kind of like a man in the middle. Get the cert from sonicwall.
20. What is SonicWall's default for site to site VPN connections: Policy Based Connections
21. User group for XAuth users: should be what?: Trusted Users
22. In the VPN Policy under the advanced tab under client authentication should "Require authentication of VPN clients by Xauth be checked": Yes, make sure to be checked to be security conscious. Requires passwords to be re-entered by users each time they connect.
23. In VPN Policy>Proposals what are the defaults for IKE(phase 1) and IKE(phase 2): IKE(Phase 1) Proposal
DH Group: G
[Show More]
 2.png)
.png)
.png)
