STERILE PROCESSING FINAL EXAM STUDY GUIDE CHAPTERS 1-23 WITH COMPLETE SOLUTION
What is Central Service ? -Answer- Centralized distribution of supplies to all customers in the hospital.
What is the Central Service O
...
STERILE PROCESSING FINAL EXAM STUDY GUIDE CHAPTERS 1-23 WITH COMPLETE SOLUTION
What is Central Service ? -Answer- Centralized distribution of supplies to all customers in the hospital.
What is the Central Service One Way Work Flow ? -Answer- -Decontamination (soiled)
-Preparation, Packaging, Sterilization (clean)
-Sterile Storage (sterile)
What is the purpose of a One Way Work Flow ? -Answer- To prevent cross contamination.
Decontamination -Answer- Physically or chemically render instruments or equipment that may be contaminated with harmful micro organisms to make it safe to handle.
Negative air flow -Answer- Air flows into a room from other surrounding areas, pressure is less than other adjacent areas.
Positive Air Pressure -Answer- Maintains air flow out of a room, this helps with keeping all dust particles and microorganisms out.
Standard Precautions -Answer- Treat everyone and everything as infected /contaminated.
Job Description -Answer- Define and communicate job duties and requirements in organization.
Nosocomial Infection -Answer- Hospital Acquired Infection.
Textile Packaging Materials should be held at a room temperature of ______ and a relative humidity of ____ for a minimum of __ ____ prior to sterilization. -Answer- -64-72 degrees F
-35-70%
-2 Hours
Superheating -Answer- When steam is at a temperature which exceeds that of saturated steam at the same pressure.
Linen packaging material is limited to a size of _______,not weigh more than _______, and maximum density must not exceed ______. -Answer- -12x12x20
-12 lbs
-7.2 lbs
What is a wet pack? -Answer- Containers with moisture after the sterilization process is complete.
What are the 2 flat wrapping techniques and the 2 folds? -Answer- -Sequential
-Simultaneous
-Square Fold
-Envelope Fold
Wrapped pans of instruments should not exceed ____ in weight. -Answer- 16 lbs
What is the maximum weight for containerized instrument sets recommended by AAMI/ANSI? -Answer- 25 lbs
Wrapped basin sets should not exceed _____. -Answer- 7 lbs
Sterility (time-related) -Answer- Package is considered sterile until a specific expiration date is reached.
Sterility (event-related) -Answer- Items are considered sterile unless the integrity of the packaging is compromised or suspected of being compromised.
Name the 4 things that event-related sterility depends on. -Answer- 1. Quality of the wrapping material.
2. Handling procedures.
3. Storage and transport conditions.
4. Number of times the package has been handled (4 times).
Name 4 concerns when it comes to packaging. -Answer- 1. Moisture contamination.
2. Dirt, Dust, and Debris.
3. Physical damage.
4. Breakdown of packaging material due to wear of age.
Sterile Storage standards, temperatures should be at ______ and relative humidity should be less than ____. -Answer- - 64-75 degrees F
- 75%
Sterile storage standards, sterile items should be stored at least ___ away from exterior walls, ______ above the floor and from the ceiling. -Answer- -2 inches
-8-10 inches
What is Passivation? -Answer- A chemical process applied during instrument manufacture that provides a corrosion-resistant finish by forming a thin transparent oxide film.
Scissors 4 1/2" and larger use a ____ test material and scissors 4" or smaller use ______ material to check blades for sharpness. -Answer- -red
[Show More]
.png)
