ARSP 2340 Dante Certification 1

ARSP 2340 Dante Certification 1 Is there any advantage to using automatic IP addressing on a Dante network? - ✔✔Yes. Automatic addressing ensures that devices create a working LAN Does Dante support MIDI? - ✔✔No. Dant ...

ARSP 2340 Dante Certification 1 Is there any advantage to using automatic IP addressing on a Dante network? - ✔✔Yes. Automatic addressing ensures that devices create a working LAN Does Dante support MIDI? - ✔✔No. Dante only transports audio data The names of devices and channels in Dante are: - ✔✔User-definable and remembered by devices The sample rate of an audio system dictates: - ✔✔the highest audio frequency that the system can handle The bit depth of an audio system dictates: - ✔✔the amplitude resolution of each sample What is meant by a "stand alone" Dante network? - ✔✔One that is not connected to the internet or to other networks A ??? networking topology is a best practice for Dante - ✔✔Star Does Dante require special network cabling? - ✔✔Regular CAT5E or CAT6 ethernet cable is recommended Dante uses ??? switches - ✔✔standard Dante works best with ??? switches - ✔✔gigabit As sample rate is increased on a device, what other property is usually changed? - ✔✔Channel count is reduced If Dante controller is quit while audio is flowing on a Dante network, what happens? - ✔✔Nothing. Dante controller is not required to be present for a Dante network to work. If a network is only used for Dante and has only one network switch, then - ✔✔The network does not require a managed switch A connection between Dante audio channels is called: - ✔✔a subscription Dante CAN OR CANNOT use fiber instead of copper cable for ethernet - ✔✔Can How are device names used in Dante? - ✔✔Subscriptions are made from name to name What is a LAN? - ✔✔Local Area Network - a computer network that interconnects computers using a common range of IP addresses Do Dante devices require special IP configuration? - ✔✔No, all commonly supported IP address methods are supported Does a Dante network require special configuration for clocking? - ✔✔No. A clock master is always automatically elected by Dante The easiest way to get IP addresses for a functional stand alone Dante network is for all devices and computers to: - ✔✔use the "obtain an IP address automatically" setting How are devices added to a Dante network? - ✔✔Devices are automatically discovered and displayed in Dante controller Dante transmitters are sources. Dante receivers are: - ✔✔Destinations How are devices restored to a Dante network after power cycle? - ✔✔Devices and connections are automatically restored In the Dante controller routing tab, a green checkmark indicates: - ✔✔Subscription successful Dante is an example of: - ✔✔an audio over IP (AoIP) solution Dante devices with different sample rates can be on the same network and CAN OR CANNOT subscribe channels between them - ✔✔Cannot On a Dante network, latency is: - ✔✔adjustable for minimum and maximum values on each device The default Dante latency of ! millisecond is: - ✔✔very low and suitable for the majority of applications A gigabit connection can handle ??? x ??? channels of Dante audio at 48k sample rate and 24 bit depth - ✔✔512 x 512 Audio sent over a Dante network is: - ✔✔uncompressed, bit perfect What does the Dante clock master do? - ✔✔Provides synchronization for all Dante devices on the network Dante audio streams over WiFi networks ARE OR ARE NOT supported - ✔✔are not What is latency? - ✔✔Latency is the audio signal delay in any audio system When should fiber be used for an ethernet connection? - ✔✔When runs over 100 meters are required Name 2 diagnostic features of Dante controller - ✔✔Latency monitoring and clock monitoring Approx how much bandwidth is consumed by 64 channels of audio @48k/24bit excl network overgead? - ✔✔74 mbits/sec How does Dante interact w/ Energy Efficient Ethernet (EEE) switches? - ✔✔EEE switches are not recommended for use with Dante Where do Dante settings reside? - ✔✔On individual Dante devices What sample rates are supported by Dante? - ✔✔The most common; from 44.1k up to 192k What are the steps to create a subscription in Dante? - ✔✔Open the transmitter and receiver to expose channels of each; click at the intersection of the channels to connect, wait for the green check mark to appear What are the steps to delete a subscription in Dante? - ✔✔Open both transmitter and receiver to expose channels; click green check mark at intersection of the channels you wish to unsubscribe, wait for the green check mark to disappear